EAA Chapter 1000 Standardized Work Table Plans

Bob Waldmiller

Originally published June 1992

Building Instructions

BILL OF MATERIALS (to build 2 tables)
(1) 3/4" x 4' x 8' Sanded Exterior Plywood
(1) 1/2" x 4' x 8' Plywood
(14) 2" x 4" x 8' Premium Studs
(4) 1/4" x 3/4" x 8' Pine Flat Screen Moulding
(80) #10 x 3" Wood Screws
(50) #10 x 2-1/2" Wood Screws
(50) #8 x 1-1/2" Construction Screws
(1) Box of 3d Finishing Nails
(1) 16 oz Elmer's Carpenter's Wood Glue
(See cutting schedule below)

Fully assembled work table
Fully assembled work table
Assembled work table without plywood
Assembled work table shown with the plywood removed for clarity
Exploded table top
Exploded table top
Table legs
Table legs
Exploded lower shelf
Exploded lower shelf
2x4 Cutting Schedule
2x4 #
Cut to lengths
1 60" 33"
2 60" 33"
3 60" 33"
4 60" 33"
5 57" 33"
6 57" 33"
7 57" 33"
8 57" 33"
9 17.5" 17.5" 17.5" 17.5" 17.5"
10 17.5" 17.5" 17.5" 21" 21"
11 21" 21" 21" 21" 8.5"*
12 21" 21" 21" 21" 8.5"*
13 21" 21" 21" 21" 8.5"*
14 8.5"* 8.5"* 8.5"* 8.5"* 8.5"*
*Cut to match lower legs

Return to top 


EAA Chapter 1000 Home Page
E-Mail: Web Site Director Russ Erb at erbman@pobox.com

URL: http://www.eaa1000.av.org/technicl/worktabl/tablefig.htm
Contents of The Leading Edge and these web pages are the viewpoints of the authors. No claim is made and no liability is assumed, expressed or implied as to the technical accuracy or safety of the material presented. The viewpoints expressed are not necessarily those of Chapter 1000 or the Experimental Aircraft Association.
Revised -- 10 July 1997